Catalonia is unifying its fragmented tech ecosystem into a coordinated semiconductor cluster spanning photonics, packaging, AI, and chip research.

The post Can Catalonia’s Distributed Semiconductor Network Deliver? appeared first on EE Times.

uOttawa cracks quantum turbulence, making ultra-secure communication cheaper.

The post Canadian Researchers Reduce Quantum Atmospheric Turbulence appeared first on EE Times.

Machine vision has become a critical quality gate in modern industrial automation, helping manufacturers inspect products, guide robots, verify assemblies, and reduce production errors. However, reliable vision performance depends on more than the camera, lens, lighting, or software. In real factory environments, vision systems are exposed to electrical noise from motors, drives, relays, switching supplies, […]

The post Reliable Machine Vision Starts at the Circuit Level appeared first on EE Times.

This paper provides an over view of the Melexis solutions for Zero latency high precision motor control and end of shaft position and torque sensing. A family of magnetic and inductive products for every joint type in a robot, from humanoid to Cobots, from legs to fingers.

The post The First-Time-Right Revolution appeared first on EE Times.

Memory shortages put edge AI at risk. NVIDIA Jetson™ integrates validated LPDDR5 DRAM on-module—giving teams a faster, confident path to production.

The post Built-In Memory. Built-In Confidence.  appeared first on EE Times.

For some time now [Tobi Friedly] has been tinkering away at porting the original Super Mario 64 from the Nintendo 64 to just about any device imaginable. One of these …read more

The word “restomod” is a bit nebulous, but it’s normally used in the automotive world to describe taking an old car and making it better-than-new with all the technological improvements …read more

There always seem to be a handful of revolutionary technologies perpetually out of reach: fusion energy, quantum computers, and full self-driving cars are always in this list, and it seems …read more

[Brandon Lai] is hoping to build a humanoid robot. To that end, he’s going to need some actuators, and decided to design his own. His second pass at this turned …read more

Audiophiles all know everything sounds better fed through vacuum tubes, but did you know visualizers look better with them, too? That’s what we’re forced to conclude looking at the Tachyscope …read more

neythen.t shares: A two-part case housing a Raspberry Pi 4 alongside Adafruit’s 64×64 LED matrix, with all Pi port cutouts, a power passthrough for the matrix, and a vented lid with mounts for a fan and mini controller. Designed for retro gaming and cellular automata builds. FreeCAD source included download the files on: Every […]

SunsetRider shares: A hangable enclosure built specifically for the Adafruit 62×32 4mm-pitch LED Panel with the Matrix Portal S3 board. Uses M2.5×4 screws to mount the S3 and M3×8 screws to attach to the panel. Designed to fill the full P1/X1 print bed download the files on: Every Thursday is #3dthursday here at Adafruit! […]

runemg shares: A sturdy case for ESP32 DevKit boards with an external antenna — designed specifically for ESPHome installs and Bluetooth proxies. Snug fit, accommodates the antenna routing, and works for HDMI-CEC variants too. By RunesBlog download the files on: Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion […]

Ecki_0208 shares: A custom ESP32 dev board enclosure with a DHT22 temperature/humidity sensor cutout, USB-C access, underside cutouts for the reset/boot buttons, and a rectangular airflow opening above the sensor for accurate readings. Built for DIY IoT and smart-home monitoring download the files on: Every Thursday is #3dthursday here at Adafruit! The DIY 3D […]

From the mail bag! Hello Adafruit Team, My name is Anthony and my business would not be possible without you guys, I just want to take this opportunity to thank you all for your hard work, especially towards the discord team for always helping me out! I have been using the Feather M0 and M4 […]

Renesas has bought software developer Pictorus, based in Oakland, California. With the acquisition of Pictorus, Renesas gains a cloud-based behavioural modelling platform that accelerates embedded system development, moving the engineering ...

The post Renesas buys Pictorus appeared first on Electronics Weekly.

Agile Analog, the analogue security IP specialist, has announced a collaboration with Xiphera, the hardware-based cryptographic products  expert. The integration of Agile Analog’s agileSecure anti-tamper sensor IP and Xiphera’s digital ...

The post Agile Analog hooks up with Xiphera for IC unified security defence appeared first on Electronics Weekly.

Taoglas, the San Diego antenna supplier, has bought Wirral, UK-based Sure Antennas, a specialist in advanced vehicle communications systems for emergency services, public safety and mission-critical fleets, headquartered in the ...

The post Taoglas buys Sure Antennas appeared first on Electronics Weekly.

6G will be an evolutionary technology that builds on Massive MIMO, the existing site grid, and wider channel bandwidths to deliver step-change improvements in RAN economics, believes Dell’Oro. “While the ...

The post 6G to improve RAN economics appeared first on Electronics Weekly.

Synopsys has announced availability of its first Multiphysics Fusion product for customer deployment. As chip complexity increases, physics-related challenges including signal integrity, power integrity, thermal integrity, electromagnetic effects, and co-packaged ...

The post Synopsys, Ansys launch Multiphysics Fusion products appeared first on Electronics Weekly.